Feature

Shaft Size: 0.75" Diameter, 2.43" Long, end tapped with 5/16"- 24 UNF; Keyway 3/16".

Powerful Engine: EPA compliant, max torque 8.1 ft.-lb @2500 RPM, Max 3800 RPM speed, 7 horsepower, 0.9 gal fuel tank.

Replacement: For 6/6.5/7/7.5 hp Honda/Yamaha/Kohler/Briggs & Stratton/ Engine, applicated with cement mixer, compressor, log splitter, vacuum, water pump, chipper shredder etc.

Industrial Grade: Provides powerful strength to get the job done, Fuel Shut Off and gas saving overhead valves. Easy-reach recoil starter system with auto-decompression.

Product Parameter

Maximum Torque: 8.1 ft. lbs. @ 2500 RPM

Maximum Power: 7 HP @ 3600 RPM
Compression Ratio: 9.0:1
Bore × Stroke: 70 mm * 55 mm
Fuel Type: 87+ octane stabilizer treated unleaded gasoline
Shaft length (in.): 2.43 in. / 61.7 mm
Shaft Diameter: 3 /4 in. / 19.1 mm
PTO Shaft Keyway: 3 /16 in / 4.76 mm

Fuel Type: Gasoline
Engine Type: Industrial OHV Gasoline Engine
Horsepower: 7
Engine displacement (CC) : 212
Fuel Tank: 0.9 gallons
Engine Cooling Type: Forced Air Cooled
Mounting Type: Universal 4-bolt pattern

Will fit Following Models

for Honda GX120-118cc, GX160-163cc, GX160-163cc, GX200-196cc

for Briggs & Stratton XR750-163cc, XR950-208cc

for Kohler RH255-196cc, RH265-196cc, CH260-208cc, CH270-208cc

for Yamaha MZ175-171cc, MZ200-192cc

for Kawasaki FJ130D-133cc, FJ180D-179cc

Note

It may touched oily, as oil tested before packaging, 100% new. (engine oil Not included)

Professional installation is highly recommended.