Features:

Small Spot Welding - Compared with traditional welding machine, This Spot dent puller has smaller repair marks, it won’t damage the anti-corrosive paint on the another side of the panel.

Fast Heat Dissipation - The cooling system can help the weld dent repair machine quickly dissipate heat, ensure that the spot dent puller works continuously for a long time without burning.

Digital Display Panel - This welding dent puller has digital display panel and supports 7 welding modes. Easy to operate, it is an excellent tool for professionals or novices.

Complete Accessories - We provide complete accessories to ensure that our spot weld dent puller can repair all kind of dents.You will get a hook, manual sucker, triangle chuck, carbon rods, spanner for wrench, carbon rod connector, triangle straight pull sheet, manual, etc.

Specs:
Support Voltage: 110V

Input power: 3KW
Input the maximum current: 20A (MAX.)
Vacuum suction: 396.8lb/180kg
Work stalls: 7 channels 63 modes
Regular working hours: Automatic mode program setting
Welding thickness of single-sided: 0.024~0.047in/0.6~1.2mm

Product Size: 12.8*8.26*8.54inch/32 .5x21.7x21cm
Pull Gun Length: 23.62inch/60cm
Pull Hammer Length: 18.9inch/48cm

Package Content:

1×Hook hammer
1×Carbon rod connector
1×Triangle chuck
1×Manual sucker
2×Carbon rods
10×Triangle straight pull sheet
1×Spanner for wrench
1×Host
1×Manual

NOTE:

1. Ensure that the product is connected to the ground wire and the grounded power cord is in good condition.
2. Ensure that the workbench is connected to the grounding device.
3. Make sure that the operator has no contact with the metal parts to be welded without any protection.
3. Do not work in a very wet place or on a wet floor.
4. Avoid to be in contact with the welding part.
5. Don’t weld with worn out cables. Check that there is no default with the isolation with stripped cables or with loose connections.
6. The connection is released, the water cooling system leakage and other unsafe factors.
7. Turn off the machine and disconnect the power plug directly before performing all inspections and maintenance.
8. Switch off the unit before replacing the metal parts.
9. Please protect your eyes and wear protection clothes when operate the machine. Please don’t wear the ring, watch etc.